Dell U2913WM Monitor - Manual (Page 13)

VESA, 2560 x 1080 66.7 60.0 185.6 +/+
Electrical Specifications
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Digital DVI TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance
DP1.2/HDMI1.4 signal input support
Synchronization input signals TTL levels required and separate syncs (including Trigger points), SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.5 A (Typical)
Inrush current
120 V : 30 A (Max)
240 V : 60 A (Max)
Physical Characteristics
Connector type 15-pin D-sub miniature, blue connector; DVI-DL, white connector; HDMI/ DP(in)/DP(out) / mDP , black connector
Signal cable type DVI: Detachable, DVI-DL, Solid pins, shipped detached from the monitor
Analog: Detachable, D-Sub, 15 pins
DisplayPort: Detachable, DisplayPort, Solid pins
Mini-DP to DP: Detachable, DisplayPort, Solid pins, shipped detached from the monitor
High Definition Multimedia Interface: Detachable, HDMI, 19 pins
Dimensions (with stand)
Height (extended)
487.0 mm (19.17 inches)
Height (compressed) 358.7 mm (14.12 inches)
Width 699.8 mm (27.55 inches)
Depth 194.2 mm (7.65 inches)
Dimensions (without stand)
Height
317.0 mm (12.48 inches)
Width 699.8 mm (27.55 inches)
Depth 61.2 mm (2.41 inches)
Stand dimensions
Height (extended)
401.2 mm (15.80 inches)
Height (compressed) 358.1 mm (14.10 inches)
Width 288.0 mm (11.34 inches)
Depth 194.2 mm (7.65 inches)
Weight
Weight with packaging
11.35 kg(25.02 lb)
Weight with stand assembly and cables 8.34 kg (18.39 lb)