Dell PowerVault DP500 User Manual
Page 32
32
DPM Reinstallation
NOTE:
Once the installation completes, you can access the license agreement from
the DPM Administrator Console by clicking the product information icon on the
navigation bar.
5 On the Welcome page, click Next.
DPM begins a prerequisites check on all required hardware and software.
6 On the Prerequisites Check page, the setup installer displays whether your
system meets all DPM software and hardware requirements.
a
If all required components are present, a confirmation is displayed.
Click Next to continue.
b
If one or more required/recommended components are missing or
noncompliant, a warning or error message is displayed.
A warning indicates that a recommended component is missing or
noncompliant. If you choose to continue with the installation, you should
plan to resolve the issue as soon as possible.
An error indicates that a required component is missing or noncompliant.
You must resolve this type of error before you can continue with DPM
installation.
7 On the Product Registration page, enter your registration information. A
Certificate of Authenticity (COA) containing the DPM product key is
included with your system.
NOTE:
Be sure to enter the DPM product key, not the product key for Windows
Storage Server 2003 R2 x64 with SP2.
8 In the Protection agent licenses section:
a
In the Standard licenses box, enter the number of licenses you
purchased to authorize protection of file resources and system state.
This refers to the number of S-DPMLs that you have purchased.
b
In the Enterprise licenses box, enter the number of licenses you
purchased to authorize protection of both file, application and
database resources. This refers to the number of E-DPMLs that you
have purchased
NOTE:
Refer to the "DPM Licenses" section of the PowerVault Data Protection
Solution Quick Start Guide
for more information on DPM product keys and DPMLs. If
you purchase additional licenses after you initially set up DPM, or reallocate