Installing the hard drive, Removing the air tunnel, Installing the air tunnel – Dell Precision T5600 (Mid 2012) User Manual

Page 15: Removing the memory

Advertising
background image

Installing the Hard Drive

1.

Press in on the latches of the hard drive cage and slide it inside the compartment.

2.

Connect the hard drive power supply cable.

3.

Connect the hard drive data cable.

4.

Install the cover.

5.

Follow the procedures in

After Working Inside Your Computer

.

Removing the Air Tunnel

NOTE: The air tunnel is an optional component and your computer may not ship with it.

1.

Follow the procedures in

Before Working On Your Computer

.

2.

Remove:
a) cover
b) optical drive

3.

Press down on the retention tab on the air tunnel and lift it from the computer.

Installing the Air Tunnel

NOTE: The air tunnel is an optional component and your computer may not ship with it.

1.

Install the air tunnel in the computer chassis.

2.

Mount the air tunnel module on the base and press downwards until it clicks into place.

3.

Install:
a) optical drive
b) cover

4.

Follow the procedures in

After Working Inside Your Computer

.

Removing the Memory

1.

Follow the procedures in

Before Working Inside Your Computer

.

2.

Remove the cover.

3.

Press down on the memory-securing clips on each side of the memory module, and lift the memory module

upwards to remove it from the computer.

15

Advertising