Dell Precision T3610 (Late 2013) - Manual (Page 20)

3. Disconnect the speaker cable from the system board.
4. Press down the clasp, lift and remove the speaker.
Installing the Speaker
1. Replace the speaker and fix the clasp.
2. Connect the speaker cable to the system board.
3. Install the cover.
4. Follow the procedures in After Working Inside Your Computer .
Installing the Thermal Sensor
NOTE: The Thermal Sensor is an optional component and your computer may not ship with it.
1. Replace the thermal sensor in its slot and tighten the latch securing it to the computer.
2. Install the cover.
3. Follow the procedures in After Working Inside Your Computer.
20