Dell LCD TV W2606C - Manual (Page 34)

34 Troubleshooting Your LCD TV Display
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
Screen has one or more lines 1 Check the aspect ratio settings in the TV Menu. Press the Menu
button on the remote control and select Size. For more
information on using the TV Menu, see "Using the TV Menu"
on page 23.
2 Ensure the proper source is selected in the Input Select menu.
See "Input Select Menu" on page 24 for more information.
3 Try connecting a different device. Ensure that you properly
connect the cables and update the input source in the TV
Menu.
4 Update the size settings in the TV Menu. Press Menu on the
remote control and select Size.
5 Reset the original factory defaults. Press Menu on the remote
control, select Setup, and then select Factory Reset.
The side panel buttons do not work Check the TV Menu to see if the buttons have been locked. Press
Menu on your remote control, select Setup.
Use the side panel buttons to unlock the TV Menu and side
panel buttons:
1 Press the Menu button.
A message appears stating that the TV Menu and buttons are
locked.
2 While the message is on the screen, press the volume decrease
and channel up buttons on the side panel simultaneously.
A message appears stating that the TV Menu and buttons are
unlocked.
The picture is too small 1 Adjust the size settings. Press Menu on the remote control, and
select Size.
2 This may be a problem with your device. See the
documentation for the device.
Problem Possible Solution