Configuring the card – Dell UPS 4200R User Manual
Page 14
Advertising
14
|
Getting Started
Configuring the Card
To configure the card:
1
Verify that the serial cable (supplied) is connected to the card's Settings port and the computer's
COM port.
2
Open your terminal emulation program (such as HyperTerminal).
3
Select the serial connection (such as COM1).
4
Set the serial line to 9600 baud, 8 data bits, No parity, 1 stop bit, no flow control (see Figure 6).
Figure 6. Configuring Port Settings
Advertising