Computer orientation, Screw identification – Dell Precision M65 User Manual
Page 5
3.
Disconnect any telephone, network, and USB cables from the computer.
4.
Disconnect your computer and all attached devices from their electrical outlets.
5.
Turn over the computer.
6.
Remove the battery.
a.
Slide the battery-bay latch release on the bottom of the computer toward the back of the computer until the latch is engaged.
b.
Grasp the battery by the battery tab and slide the battery horizontally toward the side of the computer.
c.
Lift to remove the battery from the bay.
7.
Press the power button to ground the system board.
8.
Remove any installed ExpressCards, PC Cards, or smart cards from the computer.
Computer Orientation
Screw Identification
When you are removing and replacing components, print this section as a tool to lay out and keep track of the screws. The printout provides the number of
screws and their sizes.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you service the computer.
1
battery
2
battery-bay latch release
1
front
2
left
3
back
4
right