Dell PowerEdge 2600 - Manual

www
.dell
.com | support.del
l.com
Installing Novell
®
NetWare
®
5.1
and Support Pack 5
The following are discussed in this document:
• Preinstallation requirements (downloading required patches and files)
• Installing the NetWare 5.1 operating system and Support Pack 5 using the NetWare 5.1
Network Software CD or the NetWare 5.1 Overlay CD
Preinstallation Requirements
Verify that your system meets the minimum required driver and firmware versions and the
required system configuration parameters and component revision levels. This information
is in the Dell OpenManage Server Administrator Compatibility Guide.
After verifying the information, download the following from the Novell support and
downloads website at support.novell.com and install each individually:
• Advanced Configuration and Power Interface (ACPI) fix for Hyper-Threading
You must first use mps14.psm, which is included in the psm4b.exe patch, to install the
operating system. After the support pack is installed, you can then use the ACPI
modules from the psm4b.exe patch.
NOTE: USB and hot-plug technologies are not supported with Hyper-Threading.
• JAVA update (4pent.exe)
Create a diskette that includes the following drivers. See "Making Driver Diskettes" for
more information.
• One of the following:
– SCSI driver
– RAID controller driver
• Intel
®
NIC driver
• Broadcom NIC driver
March 2003