Dell PowerEdge M610 User Manual
Page 123
About Your System
123
DIMMs <A1-A8>
disabled - MemBIST
error.
The memory modules are
not properly seated.
The memory module
connector may be exposed
to dust.
Unsupported memory
module.
Replace or reseat the
memory module(s). See
page 171.
Ensure that the memory
module connectors are clean
and supported memory
modules are installed in a
valid configuration. See
DIMMs <A1-A8>
disabled - MemBIST
timeout.
DIMMs <A1-A8>
disabled - Rank
not found.
DIMMs <A1-A8>
disabled - DIMM
communication
error.
DIMMs <A1-A8>
disabled - DDR
training error.
DIMMs <A1-A8>
disabled - Simple
memory test
failure.
DIMMs <A1-A8>
disabled - No
memory detected.
The memory modules are
not properly seated.
The memory module
connectors may be
exposed to dust.
Unsupported memory
module.
Replace or reseat the
memory module(s). See
page 171.
Verify that the memory
modules are identical and in
a lock-step pair.
DIMMs <A1-A8>
disabled - Invalid
DIMM.
Unsupported memory
modules in the first locked
step pair.
M910" on page 179.
Replace the memory
modules. See "System
Table 1-27. Blade Messages
(continued)
Message
Causes
Corrective Actions