Dell Latitude E6420 ATG (Early 2011) - Manual (Page 69)

Smart Card Reader
22
Removing the Smart Card
1. Follow the procedures in Before Working On Your Computer .
2. Remove the ATG Handle (only for E6420 ATG systems).
3. Remove the ATG Port Cover (only for E6420 ATG systems).
4. Remove the Battery .
5. Remove the SD Card .
6. Remove the Base Cover .
7. Remove the Hard Drive .
8. Remove the Keyboard Trim .
9. Remove the Keyboard .
10. Remove the Palmrest Assembly .
11. Remove the Smart Card Reader cable from the system board.
12. Remove the screws securing the Smart Card Reader to the computer.
69