Removing the power-switch board, Installing the power-switch board – Dell OptiPlex 9020 (Mid 2013) User Manual
Page 18
Advertising
Removing the Power-Switch Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a) cover
b) front bezel
c) drive cage
3.
Disconnect the power-switch cable from the power-switch board.
4.
Remove the screw and pull the power-switch board out of the computer.
Installing the Power-Switch Board
1.
Align the power-switch board to the front of the computer and tighten the screw.
2.
Connect the power-switch cable to the power-switch board.
3.
Install:
a) drive cage
b) front bezel
c) cover
18
Advertising