Dell PowerVault NX1950 - Manual (Page 32)

32 Deployment Guide
Accessing OpenManage Server Administrator
You can access Server Administrator locally through the host by double-clicking the
Server Administrator icon on the desktop. The PowerVault NX1950
Management Console also has a link to Dell OpenManage Systems Management
Software in the "Dell Storage Management Tools" on page 19.
To access Server Administrator directly from a client system on the same network,
open Internet Explorer 6.0 or later and connect to the secure port, 1311, of
your PowerVault NX1950 storage system.
For example, type:
https://DELL1234567:1311
where DELL1234567 is the name of your PowerVault NX1950 storage system.
If port 1311 is disabled by the firewall, use the following procedure to set an
exception to enable port 1311 for the use of Dell OpenManage Server
Administrator.
1 Click Start and select Settings→ Control Panel→ Windows Firewall.
2 Click the Exceptions tab.
3 Click Add port.
4 Type Dell OpenManage Server Administrator in the Name
field.
5 Type 1311 in the Port number field.
6 Click OK.
7 If prompted, restart the firewall service.
Adding Trusted Sites to Your Browser
Due to enhanced Microsoft security standards, you may be prompted to add an
internet or intranet site to the trusted sites zone when you initially access the site.
To add trusted sites to Internet Explorer, perform the following steps:
1 In the Tools menu, click Internet Options.
The Internet Options window appears.
2 Click the Security Tab.
The Security tab menu appears.