Dell Inspiron 300m - Manual (Page 90)

90 Solving Problems
www
.dell.com | support.dell.com
8 Open the display and place the computer right-side up across two books or similar
props to let air circulate all around it. Let the computer dry for at least 24 hours in a
dry area at room temperature.
CAUTION: To help prevent electrical shock, verify that the computer is
thoroughly dry before continuing with the rest of this procedure.
NOTICE: Do not use artificial means, such as a hair dryer or a fan, to speed the drying process.
9 Ground yourself by touching one of the metal connectors on the back of the computer.
10 Replace the memory module, the memory module cover, and the screw(s). Follow the
memory installation instructions listed in "Adding Memory" on page 102.
11 Replace any PC Cards you removed.
12 Replace the battery. See "Installing a Battery" on page 48.
13 Turn on the computer and verify that it is working properly.
If the computer does not start, or if you cannot identify the damaged components, contact
Dell (see "Contacting Dell" on page 127).
If You Drop or Damage Your Computer
1 Save and close any open files, exit any open programs, and shut down the computer
(see "Turning Off Your Computer" on page 41).
2 Disconnect the AC adapter from the computer and from the electrical outlet.
3 Turn off any attached external devices, and disconnect them from their power sources
and then from the computer.
4 Remove and reinstall the battery (see "Removing a Battery" on page 47 and "Installing
a Battery" on page 48).
5 Turn on the computer.
If the computer does not start, or if you cannot identify the damaged components, contact
Dell (see "Contacting Dell" on page 127).