Replacing the fan, Procedure, Post-requisites – Dell Inspiron 13 7000 Series 2-in-1(7348, Early 2015) User Manual
Page 47
Replacing the Fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the fan with the screw holes on the palmrest
and keyboard assembly.
2 Replace the screws that secure the fan to the palmrest and keyboard
assembly.
3 Connect the fan cable to the system board.
4 Route the I/O-board cable through the routing guides on the fan.
5 Slide the I/O-board cable into the I/O-board cable connector on the
system board and press down the latch to secure the cable.
Post-requisites
1
Replace the
.
2 Replace the
.
47