Expresscard reader – Dell XPS M1730 (M1730, Late 2007) User Manual
Page 59
Advertising
ExpressCard Reader
59
16
ExpressCard Reader
CAUTION:
Before performing the following procedures, follow the safety
instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching a connector on the back panel of the
computer.
1 Follow the procedures in "Before You Begin" on page 9.
2 Remove any installed ExpressCards from the ExpressCard slot.
3 Remove the display assembly (see "Display Assembly" on page 37).
4 Remove the palm rest (see "Palm Rest" on page 49).
5 Remove the four screws that secure the Express Card reader to the
computer base.
1
M2 x 3-mm screws (4)
2
Express Card reader
2
1
Advertising