Version, see, Table 1, Smb (cifs) and nfs connectivity – Dell PowerVault NX1950 User Manual

Page 3

Advertising
background image

 

Table 1-2. Minimum Supported BIOS Version for PowerEdge Systems

 

SMB (CIFS) and NFS Connectivity

Use a generic NIC 10/100/1000 for network file system (NFS) v2/v3 and Microsoft Server Message Block/Common Internet File System (SMB/CIFS) compliant
client connectivity.

 

Supported Hardware and Software for PowerVault NX1950 Storage Solution

Table 1

-3

to

Table 1

-10

provide information about the required versions for various hardware and software components. You must install the software

components together as listed in the stack and not seperately.

Broadcom

®

NetXtreme™ Family of 

Adapters, NetXtreme II Family of
Adapters

l

 

Driver Family Version, v.11.0/T4.1,

A00 or later

l

 

Firmware, v.3.0.9 (NetXtreme)

l

 

Firmware, v.4.0.3 (NetXtreme II)

Intel® NIC PRO/1000 Family of Adapters

l

 

Driver Family Version, v.10.0 or

later

l

 

Intel network adapter firmware

v.2.0.8

 

NOTE:

For details about supported BFi host and minimum required BIOS

version, see

Table 1

-2

.

Microsoft Windows Server® 
2008 Built-In Initiator

Non-iSCSI boot

Generic NIC 10/100/1000

Microsoft Windows Server® 2008 x86 Web, DataCenter, Standard, and
Enterprise Editions and Windows Server 2008 x64 Web, DataCenter, Standard,
and Enterprise Editions

iSCSI boot

NOTE:

iSCSI boot is not supported for

Dell|EqualLogic storage solution.

Broadcom

®

NetXtreme™ Family of 

Adapters, NetXtreme II Family of
Adapters

l

Driver Family Version, v.11.0/T4.1,
A00 or later

l

Firmware, v.3.0.9 (NetXtreme)

l

Firmware, v.4.0.3 (NetXtreme II)

Intel® NIC PRO/1000 Family of Adapters

l

Driver Family Version, v.10.0 or
later

l

Intel network adapter firmware
v.2.1.15.2

Microsoft Windows Server® 2008 x86 Standard and Enterprise Editions and
Windows Server 2008 x64 Standard and Enterprise Editions

ESX iSCSI Initiator

Dell supports iSCSI Sessions from the
Guest OS and ESX Layer to a Standalone
NX1950.

VMware™ ESX Server™ 3.0.1 or later

NOTE:

For information about configuring Boot from iSCSI, see Dell PowerEdge Systems—Instructions to Perform iSCSI Boot for Dell PowerVault NX1950

Storage Solution on the Dell Support website at support.dell.com.

NOTE:

For information on PowerVault NX1950 storage system and VMware, see the Dell and VMware website at www.dell.com/vmware.

 

PowerEdge System

 

Minimum Supported BIOS Version

1900

2.0.1

1950

2.0.1

2900

2.0.1

2950

2.0.1

2970

1.3.4

6950

1.3.5

1955

1.4.2

NOTICE:

The PowerVault NX1950 storage solution is a network storage device that runs a specially configured version of Microsoft Windows Unified

Data Storage Server 2003. Do not change the hardware or the software components unless they are listed in this document.

Advertising