Dell U3014 Monitor - Manual (Page 49)

Aspect Ratio Adjust the image ratio to Wide 16:10, 16:9, Auto Resize, 4:3 or 1:1.
Sharpness
This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'.
Noise Reduction Improve the motion picture quality by reducing noise on image edge.
Dynamic Contrast Dynamic Contrast adjusts the contrast ratio to 2,000,000 : 1.
Push the
button to select the Dynamic Contrast "On" or "Off" .
NOTE: Dynamic Contrast provides higher contrast if you choose Game mode and Movie mode.
Uniformity
Compensation Select screen brightness and color uniformity compensation settings. Calibrated is factory calibrated setting by default.
Uniformity Compensation adjusts different areas of the screen with respect to the center to achieve uniform brightness and color over the entire screen. For
optimal screen performance, Brightness and Contrast for some preset modes (Standard, Color Temp) will be disabled when Uniformity Compensation is
turned On. When Uniformity Compensation is turned On, Energy Smart cannot be activated.
NOTE: User is advised to use factory default brightness setting when Uniformity Compensation is turned on.
For other brightness level setting, the uniformity performance may deviate from the data shown on the Factory Calibration Report.
Smart Video
Enhance Press the key to select the Smart Video Enhance "Movie" or "Advance" or "Off".
Smart Video Enhance automatically detects video(motion) in any window on the screen, and applies enhancements to the video. Only the video window is
enhanced. Two different enhancement settings are available: