Dell P2314T Multi Touch Monitor with LED - Manual (Page 28)

28 Operating the Monitor
Menu and Submenus Description
Saturation
This feature adjusts the color saturation of the video image.
Use
or to adjust the saturation from 0 to 100.
Press to increase the monochrome appearance.
Press to increase the colorful appearance.
NOTE: Saturation adjustment is available only for video
input.
Reset Color Settings Resets your monitor’s color settings to the factory defaults.
Display Settings
Aspect Ratio Adjust the image ratio to Wide 16:9, 4:3, or 5:4.
Horizontal Position
Adjusts the horizontal position of the image.
Use the
and buttons to change the image position.
Vertical Position
Adjusts the vertical position of the image.
Use the
and buttons to change the image position.
Sharpness
Makes the image look sharper or softer.
Use
or to adjust the sharpness.
Pixel Clock
The Phase and Pixel Clock adjustments allow you to adjust
your monitor to your preference.
Use the
and buttons to adjust for best
image quality.
Phase
If satisfactory results are not obtained using the Phase
adjustment, use the Pixel Clock (coarse) adjustment and
then use Phase (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only
available when your monitor is connected using the VGA
cable.
Dynamic Contrast
Dynamic Contrast adjusts the contrast ratio to
8,000,000 : 1.
Push the
button to select the Dynamic Contrast “On”
or “Off”.
Reset Display Settings Restores the display settings to factory defaults.