Dell Studio Desktop D540 (Late 2008) User Manual
Page 6
Replace the card retention bracket ensuring that:
l
The guide clamp is aligned with the guide notch.
l
The tops of all cards and filler brackets are flush with the alignment bar.
l
The notch in the top of the card or filler bracket fits around the alignment guide.
Configuring Your Computer After Removing or Installing a PCI/PCI Express Card
Back to Contents Page
1
alignment guide
2
filler bracket
3
alignment bar
4
card retention bracket
5
guide clamps (2)
6
guide notchs (2)
NOTE:
For information on location of connectors, see the Setup Guide. For information on installing drivers and software for your card, see the
documentation that shipped with the card.
Installed
Removed
Sound Card
1.
Enter system setup (see
System Setup
).
2.
Go to Integrated Peripherals and select Onboard Audio Controller, and then
change the setting to Disabled.
3.
Connect the external audio devices to the sound card's connectors.
1.
Enter system setup (see
System Setup
).
2.
Go to Integrated Peripherals and select Onboard Audio Controller
change the setting to Enabled.
3.
Connect the external audio devices to the computer's back panel connectors.
Network
Card
1.
Enter system setup (see
System Setup
).
2.
Go to Integrated Peripherals and select Onboard LAN Controller, and then
change the setting to Disabled.
3.
Connect the network cable to the network card's connector.
1.
Enter system setup (see
System Setup
).
2.
Go to Integrated Peripherals and select Onboard LAN Controller
change the setting to Enabled.
3.
Connect the network cable to the integrated network connector.