Dell PowerVault MD3000 User Manual
Page 24
Advertising
24
Hardware Installation
b
Turn on the MD3000 and wait for the status LED to indicate that the
unit is ready:
•
If the status LEDs light a solid amber, the MD3000 is still coming
online.
•
If the status LEDs are blinking amber, there is an error that can be
viewed using the MD Storage Manager.
•
If the status LEDs light a solid blue, the MD3000 is ready.
c
After the MD3000 is online and ready, turn on any attached host
systems.
5 Using the MD Storage Manager, update all attached MD1000 firmware if
it is out of date:
a
Select Support
→ Download Firmware→ Download Environmental
(EMM) Card Firmware.
b
Check the Select All check box so that all attached MD1000
enclosures are updated at the same time (each takes approximately
8 minutes to update).
Advertising