Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 5)

Platform Guide 5
Table 1-2 provides the supported RAID controllers and network adapters for your cluster nodes.
Cluster Data Sheet
The following sheet can be attached to the back of each cluster node or rack and used by the
system installer to record important information about the cluster hardware on each cluster
component. If you need to call Dell for technical support, complete this sheet before you call and
have it available for the technician to assist you with your problem.
The following information is required for the configuration matrix form:
• Cluster name, installer, date installed, and notes
• Cluster system information
• Storage array description for each storage array
• Service tag information for each cluster component
• PCI slot number for each cluster node, a description of each PCI slot, the adapters installed in
each slot, and a usage description for each installed adapter
Table 1-2. Supported RAID Controllers and Network Adapters
PowerVault
NAS System Supported RAID Controllers Network Adapters
770N PERC 3/DC
PERC 4/DC
NOTE: Install the PERC cards in
PCI-X expansion card slots 2–5. Dell
recommends that you do not install
the PERC cards in slots 6 and 7.
Intel ® PRO/1000 XT
Intel PRO 1000F
Intel PRO/100+
Intel PRO/100 S
Intel 10/100/1000 Gigabit Ethernet
Broadcom 10/100/1000 Gigabit Ethernet
775N PERC 3/DC
PERC 4/DC
Cluster Type PowerVault NAS SCSI Cluster Solution
Cluster name
Domain name
Cluster IP address
Cluster subnet mask
(same as public
network)