Dell PowerVault DR2000v - Manual (Page 22)

22 Setting up NetVault Backup Native Virtual Tape Library on the Dell™ DR4X00 Disk Backup Appliance
Before the library creation takes place create a directory in the CIFS share on the DR4x00 unit. In our
example (Figure c) we have created a directory called VTL. An NVBU Virtual Tape Library with 10 drives,
100 media slots, and 100GB virtual tape each will be constructed within the VTL directory. This will yield
an approximately 10TB of usable VTL space. The example also show entry/exit ports configured for the
VTL to facilitate moving virtual media out of the library during the space reclamation process.
9. In the Add Library screen select Create Virtual Library.
Note: When targeting a CIFS share for NVBU VTL creation, the full UNC path must be used for the
“Library location”.