Dell E2010H Monitor - Manual (Page 5)

Bottom View
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
Power Management Modes
If you have VESA's DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as
the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this
automatic power saving feature:
E2010H
E2210H
E2310H
Left Side Right Side
Label Description Use
1 AC power connector To connect the monitor power cable.
2 VGA connector To connect your computer to the monitor using a VGA cable.
3 DVI connector To connect your computer to the monitor using a DVI cable
4 Stand lock Disable stand release button and lock stand assembly with fastening a
M3 machine screw.
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption
Normal operation Active Active Active Blue 26 W
Active-off mode Inactive Inactive Blank Amber Less than 1 W
Switch off - - - Off Less than 1 W
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption
Normal operation Active Active Active Blue 27 W
Active-off mode Inactive Inactive Blank Amber Less than 1 W
Switch off - - - Off Less than 1 W