System board, Removing the system board – Dell Inspiron 700M User Manual
Page 28
Back to Contents Page
System Board
Dell™ Inspiron™ 700m Service Manual
Removing the System Board
1.
Remove the
battery
.
2.
Remove the optical drive module
.
a.
Slide and hold the latch release.
b.
Remove the optical drive from the bay.
3.
Remove the
hard drive
.
4.
Remove the
Mini PCI card
, if present.
5.
Remove the
modem card
, if present.
6.
Remove the
keyboard
.
7.
Remove the
upper memory module
.
8.
Remove the
memory module
.
9.
Remove the
display module
.
10.
Remove the
palm rest
.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read "
Before Working Inside Your Computer
" before performing the following procedure.
1 hex screws
(2)
4 system
board
2 coin-cell
battery
connector
5 modem
cable
connector
3 upper case
M2 x 5-mm