Dell P2210 Monitor - Manual (Page 6)

Bottom View
Monitor Specifications
Flat Panel Specifications
Left view Right view
Label Description Use
1 USB downstream ports Connect your USB devices.
2 Label card Provide clean monitor back view when reference to labels is not required.
Bottom view Bottom view with monitor stand
Label Description Use
1 AC power cord connector Connect the power cable
2 DC power connector for Dell Soundbar. Connect the power cord for the soundbar (optional)
3 DisplayPort connector Connect your computer DP cable
4 DVI connector Connect your computer DVI cable
5 VGA connector Connect your computer VGA cable
6 USB upstream port
Connect the USB cable that came with your monitor to the monitor and the
computer. Once this cable is connected you can use the USB connectors on
the side and bottom of the monitor.
7 USB downstream ports
Connect your USB devices. You can only use this connector after you have
connected the USB cable to the computer and USB upstream connector on
the monitor.
Screen type Active matrix - TFT LCD
Panel type TN