Replacing the palm-rest, Procedure, Postrequisites – Dell Inspiron 15 (3521, Late 2012) User Manual

Page 35

Advertising
background image

Replacing

the

Palm-Rest |

35

Replacing the Palm-Rest

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After work
ing inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9.
For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Procedure

1

Align the palm-rest over the computer base.

2

Press down on the palm-rest to snap it into place.

3

Slide the touchpad cable and the power-button cable into the connectors on the
system board and press down on the connector latches to secure the cables.

4

Replace the screws that secure the palm-rest to the system board.

5

Close the display and turn the computer over.

6

Replace the screws that secure the palm-rest to the computer base.

Postrequisites

1

Replace the keyboard. See "Replacing the Keyboard" on page 29.

2

Replace the optical-drive assembly. See "Replacing the Optical-Drive Assembly" on
page 21.

3

Follow the instructions from step 3 and step 4 in "Replacing the Memory Module(s)"
on page 17.

4

Replace the battery. See "Replacing the Battery" on page 13.

5

Follow the instructions in "After Working Inside Your Computer" on page 9.

OM_Book.book Page 35 Tuesday, November 20, 2012 12:43 PM

Advertising