Palm-rest assembly, Removing the palm-rest assembly – Dell XPS 14 (L401X, Late 2010) User Manual
Page 35
Palm-Rest Assembly
35
7
Palm-Rest Assembly
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell™ is not covered
by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 13) before working inside the computer.
Removing the Palm-Rest Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery (see "Removing the Battery" on page 13).
3 Remove the memory module(s) (see "Removing the Memory Module(s)"
4 Remove the hard drive (see "Removing the Hard Drive" on page 27).
5 Follow the instructions from step 4 to step 6 in "Removing the Optical
6 Remove the seven screws that secure the palm-rest assembly to the base
cover.