Dell UPS 4200R - Manual (Page 16)

16 |
Software Installation on Hyper-V Server 2008
Uninstalling the Software
To uninstall the software from the Hyper-V Server:
1 Go to the installation path. The default path is:
c:\Program file (X86)\Dell\UPSManagementSoftware
2 Enter the command:
ExitAll
3 Enter the following command to display the task list:
tasklist
4 If the javaw.exe process is running, enter the following command to stop it:
tskill PID
5 Go to the next path:
c:\Program file (X86)\Dell\UPSManagementSoftware\UninstallerData
6 The command to uninstall the software depends the command used to install the software. Enter
the appropriate command (see Table 1).
Table 1. Uninstall Software
If ... then... and...
The software was installed with the
setup command
(standard installation) enter Uninstall [the Uninstall Dell
UPS Management Software
window
opens (see Figure 11)]
follow the prompts to remove the
software.
The software was installed with the
setup -i silent command
(silent installation) enter Uninstall -i silent (the
software uninstalls with no display
messages or windows) —