Dell XPS One 24 (Late 2008) - Manual (Page 31)

Replacing Cards 31
6 Replace the computer cover (see "Replacing the Computer Cover" on
page 11).
Replacing the RF Module
CAUTION: Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see
the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1 Follow the procedures in "Before You Begin" on page 9.
2 Remove the computer cover (see "Replacing the Computer Cover" on
page 11).
3 Remove the screw securing the radio frequency (RF) module, flip the
module and disconnect the RF module cable.
4 To install the RF module, connect the RF module cable.
5 Flip the RF module and align the screw hole on the RF module with the
screw hole on the chassis.
6 Replace the screw that secures the RF module.
1 RF module 2 RF module cable
3 screw
1
2
3
A5_bk0.book Page 31 Tuesday, February 5, 2013 11:19 AM