Dell PowerEdge Rack Enclosure 4820 - Manual (Page 7)

Cabling the Dell™ PowerEdge™ R710
Page 5
Figure 4: Completed Left Side Mounted CMA Installation
Right Side Mounting Instructions
Install the CMA on the right rear side of the rails by attaching both CMA housings to the attachment brackets on
the rails. Follow steps 2‐6 from the left side mounting instructions in the previous section. See Figure 5 for an
example of a completed right side mounted CMA installation.
Figure 5: Completed Right Side Mounted CMA Installation
Cabling a PowerEdge R710 without a CMA
NOTE: The CMA on the Dell PowerEdge R710 is optional. Without the CMA installed, the system must be powered
down and all cables disconnected before it can be removed from the rack.
3.1 Routing the Cables
1. Plug in all applicable cables to the rear of the system, verifying that all connections are secure.