Dell PowerVault MD3260i - Manual (Page 54)

Back-Panel Connectors (Per RAID Controller Module)
One SAS OUT port for expansion to an additional
PowerVault MD3060e expansion enclosure
NOTE: SAS connectors are SFF-8088 compliant.
Serial connector (debug port) One 6-pin mini-DIN connector
NOTE: For technical support use only.
Management Ethernet connector One 100/1000 Mbps Ethernet connection for out-of-band
management of the enclosure
MD3260i
SAS connector One SAS OUT port for expansion to an additional
PowerVault MD3060e expansion enclosure
NOTE: SAS connectors are SFF-8088 compliant.
iSCSI connectors Four 1 Gbps iSCSI IN connectors to connect hosts
Serial connector (debug port) One 6-pin mini-DIN connector
NOTE: For technical support use only.
Management Ethernet connector One 100/1000 Mbps Ethernet connection for out-of-band
management of the enclosure
MD3660i
SAS connector One SAS OUT port for expansion to an additional
PowerVault MD3060e expansion enclosure
NOTE: SAS connectors are SFF-8088 compliant.
iSCSI connectors Two 10 Gbps iSCSI IN connectors to connect hosts
Serial connector (debug port) One 6-pin mini-DIN connector
NOTE: For technical support use only.
Management Ethernet connector One 100/1000 Mbps Ethernet connection for out-of-band
management of the enclosure
MD3660f
SAS connector One SAS OUT port for expansion to an additional
PowerVault MD3060e expansion enclosure
NOTE: SAS connectors are SFF-8088 compliant.
FC connectors Four FC IN ports to connect hosts
Serial connector (debug port) One 6-pin mini-DIN connector
NOTE: For technical support use only.
54