Daughter board, Removing the daughter board, Replacing the daughter board – Dell Inspiron 14 (M4010, Mid 2010) User Manual
Page 18
Back to Contents Page
Daughter Board
Dell™ Inspiron™ N4010 Service Manual
Removing the Daughter Board
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Follow the instructions from
step 4
to
step 15
in
Removing the System Board
.
4.
Remove the Mini-Card(s) (see
Removing the Mini-Card(s)
).
5.
Remove the display assembly (see
Removing the Display Assembly
).
6.
Remove the middle cover (see
Removing the Middle Cover
).
7.
Remove the five screws that secure the daughter board to the computer base.
8.
Lift the daughter board out of the computer base.
Replacing the Daughter Board
1.
Follow the instructions in
Before You Begin
.
2.
Align the connectors on the daughter board with the slots on the computer base.
3.
Replace the five screws that secure the daughter board to the computer base.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
daughter board
2
screws (5)