Dell PowerVault DP600 - Manual (Page 32)

32
DPM Reinstallation
2 Insert the Reinstallation DVD with Multilingual Support - Microsoft
System Center Data Protection Manager 2007 media. If the DPM Setup
Wizard does not start automatically, double-click Setup.exe in the root
folder of the DVD.
3 At the Microsoft System Center Data Protection Manager 2007 screen,
click Install Data Protection Manager.
4 On the Microsoft Software License Terms page, review the license
agreement and accept the terms.
NOTE:
Once the installation completes, you can access the license agreement from
the DPM Administrator Console by clicking the product information icon on the
navigation bar.
5 On the Welcome page, click Next.
DPM begins a prerequisites check on all required hardware and software.
6 On the Prerequisites Check page, the setup installer displays whether your
system meets all DPM software and hardware requirements.
a If all required components are present, a confirmation is displayed.
Click Next to continue.
b If one or more required/recommended components are missing or
noncompliant, a warning or error message is displayed.
A warning indicates that a recommended component is missing or
noncompliant. If you choose to continue with the installation, you should
plan to resolve the issue as soon as possible.
An error indicates that a required component is missing or noncompliant.
You must resolve this type of error before you can continue with DPM
installation.
7 On the Product Registration page, enter your registration information. A
Certificate of Authenticity (COA) containing the DPM product key is
included with your system.
NOTE:
Be sure to enter the DPM product key, not the product key for Windows
Storage Server 2003 R2 x64 with SP2.
8 In the Protection agent licenses section:
a In the Standard licenses box, enter the number of licenses you
purchased to authorize protection of file resources and system state.
This refers to the number of S-DPMLs that you have purchased.