Display assembly, Removing the display assembly – Dell Latitude E5510 (Mid 2010) User Manual
Page 4
Back to Contents Page
Display Assembly
Dell™ Latitude™ E5510 Discrete Service Manual
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
access panel
from the computer.
4.
Remove the
WLAN
card from the computer.
5.
Remove the
LED cover
from the computer.
6.
Remove the
keyboard
from the computer.
7.
Disconnect the wireless antennas and remove them from their routing paths.
8.
Remove the screws securing the bottom of the display assembly to the computer.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.