Replacing the status-light board, Procedure, Post-requisites – Dell Inspiron 15 (5548, Early 2015) User Manual
Page 57
Replacing the Status-Light
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw hole on the status-light board with the screw hole on the
palm rest.
2 Replace the screw that secures the status-light board to the palm rest.
3 Adhere the status-light board cable to the palm rest.
4 Align the right speaker with the alignment posts on the palm-rest
assembly.
Post-requisites
1
Replace the
.
2 Replace the
.
3 Replace the
4 Follow the procedure from step 3 to step 5 in replacing the
5 Replace the
.
6 Replace the
57