Dell Vostro 3460 (Early 2012) - Manual (Page 29)

Installing the Display
1. Affix the sticker to the display connecting it to the display assembly.
2. Place the display to its original position on the display assembly.
3. Tighten the screws to secure the display to the display assembly.
4. Install the:
a) display assembly
b) display-hinge cover
c) palmrest
d) keyboard
e) battery
5. Follow the procedures in After Working Inside Your Computer .
Removing the Power Connector
1. Follow the procedures in Before Working On Your Computer .
2. Remove:
a) battery
b) base cover
c) keyboard
d) palmrest
e) WLAN card
f) system board
g) display assembly
h) display-hinge cover
3. Remove the screw that secures the power connector to the computer and lift the power connector out of the
computer.
29