Dell UPS 2700R - Manual (Page 12)

6 Configuring the EMP
Configuring the EMP
This section explains how to:
• Display temperature, humidity, and status of two contact devices through a standard Web browser
• Change environment settings
• View environment log data and save the data in a CSV format file
Viewing Environment Status
1 Open your Web browser and connect to the Network Management Card’s IP address.
The home page of the Network Management Card displays.
2 Select Status from the Environment menu to display the temperature and humidity status
(see Figure 5).
NOTE: If the Environment menu does not display on the menu bar, click your Web browser’s Refresh button to
update the page.
Figure 5. Sample Network Management Card Environment Status Page