Dell Alienware M18x R2 (Early 2012) - Manual (Page 11)

After Working Inside Your Computer | 11
After Working Inside Your
Computer
After you complete the replacement procedures, ensure the following:
• Replace all screws and ensure that no stray screws remain inside your computer
• Connect any external devices, cables, cards, and any other part(s) you removed
before working on your computer
• Connect your computer and all attached devices to their electrical outlets
CAUTION: Before turning on your computer, replace all screws and
ensure that no stray screws remain inside the computer. Failure to do
so may damage your computer.
2
Book.book Page 11 Thursday, June 7, 2012 3:01 PM