Dell 1420X Projector - Manual (Page 32)

T INT —Press to decrease the amount of green in the image and to increase
the amount of red in the image (available for NTSC only).
W
HITE I NTENSITY —Use and to adjust the display white intensity.
C OLOR S PACE —Allows you to select the color space, options are: RGB, YCbCr, and
YPbPr.
VGA O
UTPUT —Select On or Off to enable or disable the VGA output function at
projector standby status. Default is Off.
NOTE: If you adjust the settings for Color Temperature, RGB Color Adjust,
Saturation, Sharpness, Tint and White Intensity, the projector automatically
switches to Custom.
Image Settings (No Input Source)
Select and press to activate image settings. The image settings menu provides
the following options:
Advanced Settings Dell 1420X
Image Settings VGA Output Off
Display Settings
Projector Settings
Menu Settings
Power Settings
Information
Resolution: 1440x1050
VGA O UTPUT —Select On or Off to enable or disable the VGA output function at
projector standby status. Default is Off.
Using Your Projector 32