Installing the power-connector port, Removing the expresscard cage – Dell Latitude E6230 (Mid 2012) User Manual
Page 41
Advertising
4.
Remove the power connector port.
Installing the Power-Connector Port
1.
Insert the power-connector port in its slot.
2.
Connect the power connector to the system board.
3.
Install the:
a) base chassis
b) speakers
c) heat-sink module
d) heat-sink fan
e) bluetooth module
f) keyboard
g) palmrest
h) base cover
i) battery
j) ExpressCard
k) SD card
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the ExpressCard Cage
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a) SD card
b) ExpressCard
c) battery
d) base cover
e) palmrest
f) keyboard
g) bluetooth module
h) heat sink
i) speakers
j) base chassis
41
Advertising