Installing a floppy drive – Dell Dimension 5100C User Manual
Page 19
Advertising
6.
Disconnect the interface cable from the system board.
Installing a Floppy Drive
1.
Follow the procedures in "
Before You Begin
."
2.
Remove the
computer cover
.
3.
Slide the drive into place until you feel a click or feel the drive securely installed.
4.
Attach the interface cable to the system board.
NOTE:
The interface cable is held in place by the metal drive bracket and does not need to be removed from the drive.
NOTE:
If the replacement or new floppy drive does not have the shoulder screws, use the screws in the drive-panel insert.
Advertising