Dell P1914S Monitor - Manual (Page 14)

14

About Your Monitor
Bottom View
1 2 3 4 5 6 7
Label Description Use
1 AC power connector To connect the monitor power cable.
2 DisplayPort connector To connect your computer to the monitor using
a DisplayPort cable.
3 Stand lock feature To lock the stand to the monitor using a M3 x 6
mm screw (screw not included).
4 DVI connector To connect your computer to the monitor using
a DVI cable.
5 VGA connector To connect your computer to the monitor using
a VGA cable.
6 USB upstream port Connect the USB cable that came with your
monitor to the monitor and the computer. Once
this cable is connected, you can use the USB
connectors on the monitor.
7 USB downstream port Connect your USB device. You can only use
this connector after you have connected the
USB cable to the computer and USB upstream
connector on the monitor.
Monitor Specifications
The following sections give you information about the various power
management modes and pin assignments for the various connectors of
your monitor.
Power Management Modes
If you have VESA’s DPM compliance display card or software installed
in your PC, the monitor automatically reduces its power consumption
when not in use. This is referred to as Power Save Mode. If the computer
detects input from keyboard, mouse, or other input devices, the monitor
automatically resumes functioning. The following table shows the power
consumption and signaling of this automatic power-saving feature: