Dell M210X Projector - Manual (Page 29)

Saturation, Sharpness, Tint, and Advanced the projector automatically switches
to Custom.
NOTE: If you adjust the settings for Brightness, Contrast, Saturation,
Sharpness, Tint, and Advanced the projector automatically switches to Custom.
B RIGHTNESS —Use and to adjust the brightness of the image.
C ONTRAST —Use and to adjust the display contrast.
S ATURATION —Allows you to adjust the video source from black and white to fully
saturated color. Press to decrease the amount of color in the image and to
increase the amount of color in the image.
S
HARPNESS —Press to decrease the sharpness and to increase the sharpness.
T INT —Press to increase the amount of green in the image and to increase
the amount of red in the image (available for NTSC only).
A
DVANCED —Press to activate Picture Advance Menu. See "PICTURE
ADVANCED" below.
NOTE: Saturation, Sharpness, and Tint are only available when input source is
from Composite or S-Video.
PICTURE ADVANCED
Using the Picture Advanced menu, you can adjust the display settings of your
projector. The Picture Advanced menu provides the following options:
W HITE I NTENSITY —Use and to adjust the display white intensity.
C OLOR T EMP —Allows you to adjust the color temperature. The screen appears
cooler at higher color temperatures and warmer at lower color temperatures.
When you adjust the values in the Color Adjust menu, the Custom mode is
activated. The values are saved in the Custom mode.
C
USTOM C OLOR A DJUST —Allows you to manually adjust the colors red, green, and
blue.
Using Your Projector 29