Dell PowerVault 745N - Manual (Page 3)

Attaching the COA Label
When you have completed the AX100 or AX100i setup and installation, apply the Microsoft Windows
Storage Server 2003 Certificate of Authenticity (COA) label to your PowerVault 745N system next to
the existing COA label. The existing COA label is located above drive 3 as shown in Figure 1.
Figure 1. COA Label Location
____________________
Information in this document is subject to change without notice.
© 2005 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerVault are trademarks of Dell Inc; Microsoft and Windows are registered
trademarks of Microsoft Corporation; EMC, PowerPath, and Navisphere are registered trademarks of EMC Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their
products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
1 hard drive 3 2 new COA label 3 existing COA label
1 2
3