Chariot Carriers CX 1 - Manual (Page 36)

36
Guide the quick-release axle through the wheel axle and screw
on the nut. Both skewer springs must be located on each side
so that the narrow side points towards the centre of the hub.
Tip the carrier backwards and put it down on the handlebar.
Insert the wheel in the axle dropouts.
Close the quick-
release lever.
,QRUGHUWRHQVXUHWKDWWKHKXELVFODPSHGVXI¿FLHQWO\LQWKH
axle dropouts, the quick-release lever must begin gripping as it
moves from the open to the middle position, and approaching
the closed position you should clearly feel resistance as you
tighten.
,ILWLVWRRHDV\RUWRRGLI¿FXOWWRPRYHWKHTXLFNUHOHDVHWLJKWHQ
or loosen the lock nut on the other side of the hub to adjust.
,I\RXGRQ¶WIHHOFRQ¿GHQWRSHUDWLQJWKHTXLFNUHOHDVH
skewer, please ask your specialist retailer for assistance.
DANGER
Always make sure that the quick-release is correctly instal-
led. An incorrectly tensioned quick-release may lead to the
rear wheel coming loose, resulting in accidents.
DANGER
When using the carrier as a Jogging Stroller, always put the
safety wrist strap, which is fastened securely on the left rear
upper frame tube, around your wrist. This prevents the carrier
from accidentally rolling away.