Dell Inspiron 4000 - Manual (Page 7)

2. Set the Infrared Mode option to either Fast IR or Slow IR.
3. Restart the computer.
4. Click the Start button, point to Settings, and then click Control Panel.
5. Double-click the Add New Hardware icon.
6. In the Add New Hardware window, click Next to continue.
7. When the Add New Hardware Wizard asks to search for new hardware, click No and then click Next.
8. When the Hardware Types window appears, click the Infrared tab and then click Next.
9. When the Add Infrared Device Wizard window appears, click Next.
10. Follow the instructions on your display.
11. After completing the instructions, restart you computer.
Installing Docking Drivers
To reinstall the docking drivers for your computer, you must run the Dock QuickInstall program before you install the docking drivers.
Running Dock QuickInstall
1. If the computer has never been turned on, turn it on while it is undocked and complete the operating system setup.
For setup instructions, see the operating system documentation that came with the computer.
2. Save and close any open files, and exit any open programs because you will need to restart your computer at the end of this procedure to complete the
installation.
3. Insert the Drivers and Utilities CD into the drive.
4. Click the Start button, and then click Run.
5. Type x:\win9x\dockqi\setup, where x is the drive letter of your CD drive or DVD drive, and click OK.
6. Follow the instructions on your display.
7. After the files are copied to your hard drive, click Finish to restart your computer.
Installing Docking Drivers
1. If you have completed the operating system setup, turn on the computer.
2. Dock the computer.
For instructions on using the advanced port replicator (APR), see the Advanced Port Replicator User's Guide that came with the computer. The operating
system creates a hardware profile for the APR.
3. To load the appropriate drivers for use with the APR, follow the instructions on the display.
4. When prompted, restart the computer.
Installing the Intel® SpeedStep™ Utility
The Intel SpeedStep utility conserves battery power by automatically adjusting the processor speed when you run your computer from the battery instead of
AC power. Intel SpeedStep technology reduces the processor speed when the computer is running on the battery and resumes maximum processor speed
when the computer is plugged into an electrical outlet.
1. Save and close any open files, and exit any open programs because you will need to restart your computer at the end of this procedure to complete the
installation.
2. Insert the Drivers and Utilities CD into the drive.
3. Click the Start button, and then click Run.
4. Type x:\win9x\speedstp\language\setup, where x is the drive letter of your CD drive or DVD drive and language is English, French, German, Italian,
Japanese , Korean, Schinese (Simplified Chinese), Spanish, or Tchinese (Traditional Chinese). Click OK.
5. Follow the instructions on your display.
6. After the files are copied to your hard drive, click Finish to restart your computer.
Reinstalling Windows 98
HINT: If the infrared device is not listed, click No and then click Next.