Dell FDP SoundBar with Virtual Surround (AY511) - Manual (Page 10)

Unbalanced audio
output Audio is heard
from only one side
of the soundbar • Remove any obstructions between
you and the soundbar.
• Ensure that the audio cable
connector is completely inserted
into the audio out connector of the
sound card or audio source.
• Set the audio balance controls on
the Windows operating system to
their mid points.
• Remove and reconnect the audio
cable to your computer and
soundbar.
• Troubleshoot the computer's sound
card.
• Test the soundbar using another
audio source (for example, a
portable CD player).
Low volume Volume is too low • Remove any obstructions between
you and the soundbar.
• Increase the volume level on the
soundbar by touching the
icon.
• Increase the volume controls on the
Windows operating system to their
maximum.
• Increase the volume level on the
audio application if other audio
application software is used.
• Test the soundbar using another
audio source (for example, a
portable CD player).
Problem Observation Possible Solutions
AY511.fm Page 18 Tuesday, September 29, 2009 2:21 PM