Wireless switch – Dell Latitude D430 (Mid 2007) User Manual
Page 33
Back to Contents Page
Wireless Switch
Dell™ Latitude™ D430
1.
Follow the instructions in
"Before You Begin" on page 7
.
2.
Remove any installed PC Cards from the PC Card slot.
3.
Remove any installed memory modules or Mini PCI cards (see
Memory
and
Mini-Cards
).
4.
Remove the hard drive (see
Hard Drive
).
5.
Remove the hinge cover (see
Hinge Cover
).
6.
Remove the keyboard (see
Keyboard
).
7.
Remove the internal card with Bluetooth® wireless technology (see
Internal Card With Bluetooth® Wireless Technology
).
8.
Remove the display assembly (see
Display Assembly
).
9.
Remove the palm rest (see
Palm Rest
) and lay it aside.
10.
Remove the system board (see
System Board
).
11.
Use a screw driver or plastic scribe to carefully pry the wireless switch from the wall of the computer base.
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE:
Handle components and cards by their edges, and avoid touching pins and contacts.
1
computer base
2
wireless switch
3
screw driver