Dell E2209WFP Monitor - Manual (Page 16)

or
Main Menu for Digital (DVI-D) Input
NOTE: AUTO ADJUST is only available when you use the analog (VGA) connector.
2.
Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all
the options available for the monitor.
3. Push the button once to activate the highlighted option.
4. Push the and buttons to select the desired parameter.
5. Push to enter the slide bar and then use the or button, according to the indicators on the menu, to make your changes.
6. Press the Menu button once to return to the main menu to select another option or press the Menu button two or three times to exit from the OSD menu.
Icon Menu and Description