Dell Studio XPS 7100 (Mid 2010) - Manual (Page 53)

Replacing the Top I/O Panel
1. Follow the instructions in Before You Begin .
2. Align the screw holes on the top I/O panel with the screw holes on the top panel.
3. Replace the two screws that secure the top I/O panel to the top panel.
4. Connect the top I/O panel cables to the system board connectors, F_USB3 and F_AUDIO1 (see System Board Components ).
5. Replace the top cover (see Replacing the Top Cover ).
6. Replace the optical drive (see Replacing the Optical Drive ).
7. Replace the front bezel (see Replacing the Front Bezel ).
8. Replace the computer cover (see Replacing the Computer Cover ).
9. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page